Show off collectibles, jewelry, and products from every angle with the 5.4 Inch Motorized Rotating Display Stand. Beyond continuous 360° spinning, it offers four angle modes—45°, 90°, 180°, and full circulation—so you can hold a specific face of a piece rather than watching it whirl past. The 5.4-inch platform supports up to 6.6 lbs (3 kg), covering tumblers, figures, 3D-printed models, resin pieces, small busts, and product bundles. Three speeds (2, 4, 6 RPM) and an instant R/L direction button let you match the motion to close-up detail shots or dynamic reels. Operation is simple: press any button to start, long-press 3 seconds to stop. Please center items on the platform and stay within the weight rating for smooth, stable rotation.
【4 ANGLE MODES FOR PRECISION DISPLAY】‑ Unlike basic turntables that only spin continuously, this stand offers four rotation options—45°, 90°, 180°, and full 360° circulation—so you can highlight specific facets of jewelry, watches, crystals, or collectibles without repositioning by hand.【5.4" PLATFORM WITH 6.6 LB CAPACITY】‑ At 5.4 inches in diameter and rated up to 6.6 lbs (3 kg), the platform handles tumblers, figures, 3D-printed models, resin pieces, small busts, and product bundles; center items on the platform for stable rotation.【3 SPEEDS + INSTANT DIRECTION CONTROL】‑ Switch between 2, 4, and 6 RPM to match your project—slow for detailed product shots, faster for dynamic reels. The dedicated R/L button reverses between clockwise and counterclockwise without stopping.【THREE POWER MODES】‑ Run it from the included USB cable for desk or studio use, an 18650 rechargeable battery (not included) for cord-free display, or 3x AAA batteries (not included) for short-term portable use; a 5V/2A adapter (not included) is recommended for best torque.【ONE-BUTTON SIMPLICITY】‑ Press any button to turn it on and long-press (3 seconds) to power off, designed for collectors, tumbler makers, jewelry photographers, 3D model fans, and content creators who want an easy-to-use rotating display.
Show off collectibles, jewelry, and products from every angle with the 5.4 Inch Motorized Rotating Display Stand. Beyond continuous 360° spinning, it offers four angle modes—45°, 90°, 180°, and full circulation—so you can hold a specific face of a piece rather than watching it whirl past. The 5.4-inch platform supports up to 6.6 lbs (3 kg), covering tumblers, figures, 3D-printed models, resin pieces, small busts, and product bundles. Three speeds (2, 4, 6 RPM) and an instant R/L direction button let you match the motion to close-up detail shots or dynamic reels. Operation is simple: press any button to start, long-press 3 seconds to stop. Please center items on the platform and stay within the weight rating for smooth, stable rotation.
【4 ANGLE MODES FOR PRECISION DISPLAY】‑ Unlike basic turntables that only spin continuously, this stand offers four rotation options—45°, 90°, 180°, and full 360° circulation—so you can highlight specific facets of jewelry, watches, crystals, or collectibles without repositioning by hand.【5.4" PLATFORM WITH 6.6 LB CAPACITY】‑ At 5.4 inches in diameter and rated up to 6.6 lbs (3 kg), the platform handles tumblers, figures, 3D-printed models, resin pieces, small busts, and product bundles; center items on the platform for stable rotation.【3 SPEEDS + INSTANT DIRECTION CONTROL】‑ Switch between 2, 4, and 6 RPM to match your project—slow for detailed product shots, faster for dynamic reels. The dedicated R/L button reverses between clockwise and counterclockwise without stopping.【THREE POWER MODES】‑ Run it from the included USB cable for desk or studio use, an 18650 rechargeable battery (not included) for cord-free display, or 3x AAA batteries (not included) for short-term portable use; a 5V/2A adapter (not included) is recommended for best torque.【ONE-BUTTON SIMPLICITY】‑ Press any button to turn it on and long-press (3 seconds) to power off, designed for collectors, tumbler makers, jewelry photographers, 3D model fans, and content creators who want an easy-to-use rotating display.
!
